Optimization of the Process for Semiconductor Device Fabrication in the MicrON 636 Whittemore Cleanroom Facility

Download or read book Optimization of the Process for Semiconductor Device Fabrication in the MicrON 636 Whittemore Cleanroom Facility written by and published by . This book was released on 2004 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: The main objective of this work is to develop and optimize a process for the fabrication of basic semiconductor devices in silicon using the Modu-lab toolset in the MicrON 636 Whittemore cleanroom facility. This toolset is designed to work with four-inch silicon wafers, in a class 10000 cleanroom. Early work on this process produced functioning devices, with low yield and little to no process control. Three aspects of the process were therefore selected for optimization in this work. The oxidation of the surface of the silicon wafers could not be made to follow models proposed by and accepted in the literature. By carefully changing the airflow in the oxidation furnace module, the uniformity of the oxide layer and the agreement of the growth with models increases to acceptable levels. Also, the effects of redistribution of dopant species due to growth of the oxide layer and the subsequent thermal processing are examined qualitatively. Phosphorus diffusion in single-crystal silicon has a complex diffusion mechanism involving charged-vacancies, with concentration-dependent diffusion coefficients. It is therefore a complex mathematical problem to model the diffusion of phosphorus from a solid source within the crystal. An empirical model is proposed that accurately predicts the junction depth and sheet resistance of diffused phosphorus layers within the silicon wafer. Throughout the course of the process it is necessary to monitor the characteristics of the wafers to assure proper conditions.